Callout |
Component Name |
---|---|
Preliminary Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling. |
|
1 |
Engine Coolant Air Bleed Hose |
2 |
Throttle Body Heater Outlet Pipe Procedure
|
Rocking the Vehicle to Get it Out
Turn the steering wheel left and right to clear the area around the front wheels.
Turn off any traction system. Shift back and forth between R (Reverse) and a low
forward gear, spinning the wheels as little as possible. To prevent transmission
wear, wait until the wheels stop spinning before s ...
OnStar Overview
If equipped, this vehicle has a comprehensive, in-vehicle system that can connect
to a live Advisor for Emergency, Security, Navigation, Connection, and Diagnostic
Services.
The OnStar system status light is next to the OnStar buttons. If the status light
is:
Solid Green: System is read ...
Intake Manifold Installation (1.8L LUW and LWE)
Clean the sealing surfaces.
Install 4 NEW gaskets.
Caution: Refer to Fastener Caution.
Install the intake manifold (2) and the 7 intake manifold bolts (1) and
tighten to 20 Y (15 lb ft).
Install the intake m ...