Callout |
Component Name |
---|---|
1 |
Front Differential Carrier Baffle Bolts M6 x 25 (Qty: 2) |
2 |
Front Differential Carrier Baffle |
3 |
Front Differential Ring Gear Retainer Note: Note the direction of the taper to ensure proper installation. |
4 |
Front Differential Ring Gear |
5 |
Front Differential Carrier Bearing Assembly |
6 |
Fluid Pump Bolts M8 x 33 (Qty: 7) |
7 |
Fluid Pump Assembly |
8 |
Torque Converter and Differential Housing Seal |
Lower Anchor and Top Tether Anchor Locations
(Top Tether Anchor): Seating positions
with top tether anchors.
(Lower Anchor): Seating positions
with two lower anchors.
To assist in locating the lower anchors, each seating position with lower anchors
has two labels, near the crease between the seatback and the seat cushion.
To ass ...
Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution.
Caution: Always connect or disconnect the wiring harness connector
from the EBCM/EBTCM with the ignition switch ...
Tire and Wheel Assembly Balancing - On-Vehicle
Special Tools
EL-38792-A Electronic Vibration Analyzer (EVA) 2
If after following the tire and wheel vibration diagnostic process, some amount
of tire and wheel vibration is still evident, an on-vehicle high-speed spin balancer
may be used to perform an on-vehicle balance in an attempt ...