Chevrolet Sonic Repair Manual: Crankshaft Sprocket Removal

Crankshaft Sprocket Installation

Note: When installing the crankshaft sprocket, the cam and the groove must align (2). Install the crankshaft sprocket (1). ...

Crankshaft Sprocket Replacement

Crankshaft Sprocket Replacement Callout Component Name Preliminary Procedure Remove the timing belt. Refer to Timing Belt Repla ...

Other materials:

Front Disc Brake Pads Replacement
Removal Procedure Warning: Refer to Brake Dust Warning. Note: Always replace disc brake pads in axle sets. Inspect the fluid level in the brake master cylinder reservoir. If the brake fluid level is midway between the maximum-full point and the minimum allowab ...

Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange, remeasure the tire and wheel assembly on-vehicle runout in order to verify that the amount of runout has been reduced and brought to within tolerances. Mark the location of the high spot on the tire and wheel asse ...

Transmission Fluid Level and Condition Check
Removal Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Remove the front suspension skid plate, if equipped. Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement Place a basin underneath the vehicle. Clean away all ...