Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Power Windows

Warning

Leaving children in a vehicle with the keys is dangerous for many reasons. Children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function and they could be seriously injured or killed if caught in the path of a closing window. Do not leave keys in a vehicle with children.

When there are children in the rear seat use the window lockout button to prevent unintentional operation of the windows.

If equipped, press the switch to open the window. Pull the front of the switch


If equipped, press the switch to open the window. Pull the front of the switch up to close it.

The switches work when the vehicle is in ON/RUN or ACC/ ACCESSORY, or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP).

Manual Windows
If equipped, use the window crank to open and close each window. The rear windows do not open fully. ...

Express Window Operation
Windows with an express-down or express-up feature allow the window to be lowered or raised without holding the switch. The driver window has express-down and express-up. Pull a window switch up o ...

Other materials:

Front Camber Adjustment
Note: DO NOT grind the front strut bores for the bolts to allow adjustment of the front camber. There are service bolts available to allow the front camber to be adjusted, if needed. If the front camber is out of specifications, perform the following: Remove the f ...

Air Cleaner Inlet Duct Replacement
Removal Procedure Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement. Remove the upper intake air duct plastic fastener (1). Pull the lower portion of the intake air duct outward to release the duct from the rub ...

Camshaft Timing Chain Installation
Special Tools EN-952 Fixing Pin EN-953-A Fixing Tool EN-955-10 Fixing Pin from EN-955 Kit For equivalent regional tools, refer to Special Tools. The engine should be adjusted to TDC. The crankshaft should be locked with EN-952 fixing pin. The camshaft should be locked with EN-9 ...

В© 2014-2025 Copyright www.csmans.com
 
0.0097