Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
1 |
Front Wheelhouse Liner Screw ?€“ Front (Qty:?€‰5) Caution: Refer to Fastener Caution.
2.5?€‰Y?€‰(22?€‰lb?€‰in) |
2 |
Front Wheelhouse Liner Push-In Retainer ?€“ Front (Qty:?€‰2) |
3 |
Front Wheelhouse Liner ?€“ Front Procedure
Disengage the upper interlocking retainers. |
Brake Fluid
The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as
indicated on the reservoir cap. See Engine Compartment Overview for
the location of the reservoir.
There are only two reasons why the fluid level in the reservoir might go down:
The fluid level goes down ...
Engine Coolant Thermostat Housing Replacement (LUW)
Removal Procedure
Remove the battery tray. Refer to Battery Tray Replacement.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Drain the cooling system. Refer to Cooling System Draining and Filling.
Disconnect the engine harness conn ...
Timing Belt Tensioner Installation
Special Tools
EN-45059 Angle Meter
Clean the timing belt tensioner thread.
Install the timing belt tensioner (2).
Caution: Refer to Fastener Caution.
Caution: Refer to Torque-to-Yield Fastener Caution.
Install a NEW timing belt tensioner bolt (1) a ...