ABS Description and Operation
This vehicle is equipped with the MGH 60 Mando electronic stability control antilock
brake system. The electronic brake control module and the brake pressure modulator
are serviced separately. The brake pressure modulator uses a four circuit configuration
to control hydraulic press ...
Oil Level Indicator and Tube Installation
Install a NEW oil level indicator tube gasket.
Install the oil level indicator tube (2).
Caution: Refer to Fastener Caution.
Install the oil level indicator tube bolt (1) and tighten to 15 Y (11 lb ft).
Install the oil dipstick.
...
Exhaust Camshaft Removal
Remove the camshaft bearing cap bolts in a spiral sequence as shown one
turn at a time until there is no spring tension pushing on the camshaft.
Note: Mind the markings on the camshaft bearing caps to ensure
they will be installed in the same position.
Remove the ...