|
Callout |
Component Name |
|---|---|
|
1 |
Drive Sprocket Thrust Washer |
|
2 |
Drive Sprocket Retainer Ring |
|
3 |
Drive Sprocket |
|
4 |
Drive Sprocket Bearing Assembly |
|
5 |
Park Gear |
|
6 |
Driven Sprocket |
|
7 |
Drive Link Assembly |
Drive Range, Third Gear (Gen 2)
Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T30)Antilock Brake System (ABS) Warning Light
This light comes on briefly when the engine is started.
If the light stays on, turn the ignition to LOCK/OFF or if the light comes on,
stop as soon as possible and turn the ignition off. Then start the engine again
to reset the system. If the light still stays on, or comes on again while driv ...
Drivetrain and Front Suspension Frame Skid Plate Replacement
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the mounting bolts (1) for the front suspension frame skid plate.
Remove the front suspension frame skid plate (2).
Installation Procedure ...
Turbocharger Removal
Special Tool
EN-49942 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Install the EN-49942 holding wrench (2) to the turbocharger coolant
feed pipe. Guide a ratchet wrench (1) along with an extension through EN-49942
holding wrench to the turbo ...