Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Front Side Door Weatherstrip Replacement - Door Side

Chevrolet Sonic Repair Manual / Body / Body Exterior / Weatherstripping / Front Side Door Weatherstrip Replacement - Door Side



Front Side Door Weatherstrip Replacement - Door Side

Callout

Component Name

1

Front Side Door Weatherstrip Upper Retainer

Procedure

  1. Open the front side door to the fully open position.
  2. Remove the front side door check link bolt from the body side only . Refer to Front Side Door Check Link Replacement.
  3. Use a suitable tool, remove the push-in retainer from the upper rear corner of the door.
  4. Pull the weatherstrip out of the door retainer.

2

Front Side Door Weatherstrip Retainers (Qty?€‰:21)

3

Front Side Door Weatherstrip

Procedure

  1. Ensure that the weatherstrip is fully seated in the door frame retainer.
  2. Verify proper door operation.
Front Side Door Weatherstrip Replacement - Body Side
Front Side Door Weatherstrip Replacement - Body Side Callout Component Name Preliminary Procedures Remove the upper center pillar t ...

Front Side Door Window Weatherstrip Replacement
Front Side Door Window Weatherstrip Replacement Callout Component Name Preliminary Procedures Remove front side door trim panel. Re ...

Other materials:

Wireless Communication Interface Antenna Replacement
Wireless Communication Interface Antenna Replacement Callout Component Name Preliminary Procedure Remove the communication interface module. Refer to Communication Interface Module Replacement 1 ...

Front Brake Caliper Replacement
Removal Procedure Warning: Refer to Brake Dust Warning. Warning: Refer to Brake Fluid Irritant Warning. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Install ...

Main Shaft Assemble (Gen 1)
Special Tools 3-0207944 Main Shaft Tapered Bearing Insert Tool For equivalent regional tools, refer to Special Tools. Install the 4th gear bearing assembly (1). Note: The 3rd gear blocking ring lugs must be aligned with the 3rd/4th gear synchronizer assembly groov ...

© 2014-2024 Copyright www.csmans.com
 
0.0093