Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the rear side door trim. Refer to Rear Side Door Trim Replacement. |
|
1 |
Rear Side Door Pull Handle Fastener (Qty:?€‰2) Caution: Refer to Fastener Caution. |
2 |
Rear Side Door Window Switch Bezel Fastener (Qty:?€‰5) |
3 |
Rear Side Door Window Switch Bezel Assembly |
Immobilizer Description and Operation
The immobilizer system functions are provided by the body control module (BCM)
and the engine control module (ECM), as well as any modules which store and report
the environment identifier.
When an ignition key is inserted into the ignition lock cylinder and the ignition
is switched ON, the ...
Reverse (Gen 2)
When the gear selector lever is moved to the Reverse (R) position (from the Park
position) the normally-low 35R pressure control solenoid is commanded ON and the
following changes occur in the transmission? hydraulic and electrical systems:
3-5-Reverse Clutch Applies
Manual Valve
...
Transmission Fluid Level and Condition Check
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
Remove the front suspension skid plate, if equipped.
Refer to Drivetrain and Front Suspension Frame Skid
Plate Replacement
Place a basin underneath the vehicle.
Clean away all ...