Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the rear side door trim. Refer to Rear Side Door Trim Replacement. |
|
1 |
Rear Side Door Pull Handle Fastener (Qty:?€‰2) Caution: Refer to Fastener Caution. |
2 |
Rear Side Door Window Switch Bezel Fastener (Qty:?€‰5) |
3 |
Rear Side Door Window Switch Bezel Assembly |
Tire-to-Wheel Match-Mounting (Vectoring)
Note: After remounting a tire to a wheel or after replacing a tire
and/or a wheel, remeasure the tire and wheel assembly runout in order to verify
that the amount of runout has been reduced and brought to within tolerances.
Ensure that the tire and wheel assembly is properly balanced ...
Timing Belt Installation
Special Tools
EN-6333 Locking Pin
EN-6340 Locking Tool
For equivalent regional tools, refer to Special Tools.
Note: The timing belt drive gear and oil pump housing must align.
Turn the crankshaft in the direction of engine rotation, by the crankshaft
balancer bolt ...
Backup Lamp Switch Replacement
Backup Lamp Switch Replacement
Callout
Component Name
Preliminary Procedure
Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection.
Without draining the coolant or removing ...