Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Secondary Air Injection Pump Removal

Chevrolet Sonic Repair Manual / Powertrain / Engine / Emissions / Air Injection / Secondary Air Injection Pump Removal


    Disconnect the secondary air injection pump pipe (3). Refer to Plastic Collar
  1. Disconnect the secondary air injection pump pipe (3). Refer to Plastic Collar Quick Connect Fitting Service.
  2. Remove the secondary air injection pump nut (2) and the 2 secondary air injection pump bolts (4).
  3. Remove the secondary air injection pump (1).
Secondary Air Injection Pump Pipe Replacement
Secondary Air Injection Pump Pipe Replacement Callout Component Name 1 Hose Retainer (QTY:2) Note: Squeeze the r ...

Secondary Air Injection Pump Replacement
Secondary Air Injection Pump Replacement Callout Component Name 1 Secondary Air Injection Pump Inlet Pipe Note: ...

Other materials:

Electrical Power Management Description and Operation
Electrical Power Management The electrical power management is used to monitor and control the charging system and alert the driver of possible problems within the charging system. The electrical power management system makes the most efficient use of the generator output, improves ...

Drive Belt Installation
Special Tools EN-955 Locking Pins EN-48488 Holding Wrench For equivalent regional tools, refer to Special Tools. Note: Ensure that the drive belt tensioner is held with EN-955?E locking pin. Install the drive belt. Move the drive belt tensioner clockwise until EN- ...

Thrust Washer and Bearing Cleaning and Inspection
Warning: Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals. Caution: Do not allow the bearings to spin. Turn them slowly by hand. Spinning the beari ...

В© 2014-2025 Copyright www.csmans.com
 
0.0071