Chevrolet Sonic Repair Manual: SIR Seatbelt Pretensioner Handling Warning

Warning:

When carrying an undeployed inflatable restraint seat belt retractor pretensioner:

• Do not carry the seat belt pretensioner by the seat belt webbing or pigtail connector, if equipped.
• Carry the seat belt pretensioner by the housing, keeping hands and fingers away from the seat belt webbing.
• Make sure the opening, from which the seat belt webbing extends, faces downward and the seat belt webbing hangs freely.

Failure to observe these guidelines may result in personal injury.

Pretensioner Handling and Scrapping

Scrapping Procedure During the course of a vehicles useful life, certain situations may arise which will necessitate the disposal of a live (undeployed) pretensioner. The following info ...

Front Seat Belt Anchor Plate Tensioner Cover Replacement (4 Way)

Front Seat Belt Anchor Plate Tensioner Cover Replacement Callout Component Name 1 Driver or Passenger Seat Belt Tensione ...

Other materials:

Emblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution. The part and vehicle surface should be 21?°C (70?°F) prior to installation. The vehicle should remain inside in a temperature range of 21?°C (70?°F) for 1 hour after assembly to allow the adhesive to develop sufficient bo ...

Brake Fluid
The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as indicated on the reservoir cap. See Engine Compartment Overview for the location of the reservoir. There are only two reasons why the fluid level in the reservoir might go down: The fluid level goes down b ...

Automatic Transmission Flex Plate Removal
Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Install the EN-652 holder  (1) to hold the automatic transmission flex plate (2). Loosen the 6 automatic transmission flex plate bolts. Re ...