Chevrolet Sonic Repair Manual: Transmission Assembly

Automatic Transmission Flex Plate Removal

Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Install the EN-652 holder  (1) to hold the automatic trans ...

Shift Fork Cleaning and Inspection (Gen 1)

Warning: Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals. ...

Other materials:

Airbag Steering Wheel Module Coil Centering
Note: If a double wire harness strap is installed onto the wire harness assembly and steering column, the original holder for the wire strap(s) MUST be reused during installation. Remove the wire harness strap(s) where necessary. Caution: The new SIR coil assembly will ...

Tire and Wheel Balancing (Wheel Pilot Bore Greasing)
Beginning with MY 2011 vehicle, pilot bore grease should be applied. To enable this, grease must be applied to the pilot bore to prevent the wheel from seizing onto the hub. Refer to Adhesives, Fluids, Lubricants, and Sealers for pilot bore lubricant part number. Do not use any pene ...

Intake Manifold Installation
Clean the sealing surfaces. Install the intake manifold (1) along with a NEW intake manifold gasket. Caution: Refer to Fastener Caution. Install the 6 intake manifold bolts (1) and tighten to  20 Y (15 lb ft). ...